XYL I-200, XYL II-210 is mainly used for the production of copper, magnesium and aluminum alloy castings. XYL I-400, XYL II-410 is mainly used for the production of iron, steel and ferrous alloy castings.
Specifications / Models
How to use
Moisture of original sand ≤0.2%, mud content ≤0.25%, temperature 15-40℃, granularity 55-150. Total resin addition rate is 1.2-2% by sand weight, Part I: Part II = 50:50.
Blend the two parts of resins evenly firstly, then add into the sand mixer. If use low speed sand mixer, blend for 3-5 minutes. If use high speed sand mixer, blend for 45-90 seconds.
Dry compressed air with dew point at temperature of -20℃ to -40℃ as SO2 carrier.Sand mixer, core shooter, technical equipments could be employed universally with cold box process. Gas generator need be refit a little and the detergent of the exhaust gas purification tower need be changed to 10-15% sodium hydroxide water solution.
Application Range
XYL I-200, XYL II-210 is mainly used for the production of copper, magnesium and aluminum alloy castings.
Packing and Storage
Sealed in 200L iron drum with 220kg net weight, or IBC tank with 1000kg net weight.