苏州兴业新材料股份有限公司

Stock Code:SH603928   | Chinese | English
Casting Resin Series Functional Coatings Series Melting Materials Series Riser Sleeves Series Acrylic Resin Series Auxiliary Materials Series
Home | Product Center | Product | Functional Coatings Series

Flow Coating

Uniform coating layer, smooth surface, proper permeation, high refractoriness.

Characteristics
Good brushability and adhesion for resin sand molds and cores.
Uniform coating layer, smooth surface, proper permeation, high refractoriness. 
The coating layer will separate automatically when clean the casting. 



Specifications / Models






How to use

Dilution: mix the coating in the tank uniformly, then add water (or alcohol, ≥99.7%). Mix them uniformly again, test its Baume when it becomes static, and repeat this process till it meets the requirement. 
Flow coating technical parameters: Baume of water-based coating: 40-50; density: 1.20-1.40g/ml. Baume of alcohol-based coating: 50-65; density: 1.2-1.40g/ml. 
Flow coat: clean the mold (core), flow the prepared coating onto the surface of the sand mold, avoid the stacking of the coating. 
Remarks: when flow the alcohol based coating, there should be no open flame within 5 meters, the motor of the coating machine should be explosion-proof motor. Impurities should be kept away from the coating, and clean up the coating tank at the same day. 




Packing and Storage

Packed in plastic drums with sealing cover, 30kg net weight each.
For alcohol based coating, keep good ventilation, and keep away from open fire and collision. 
Stored in room with temperature 10-30℃, well ventilation, away from water, fire, heat source and direct sunshine. 
Shelf life is 6 months on the above conditions.  


Copyright © 2016 Suzhou Sinye Materials Technology Co., Ltd. All Rights Reserved.