苏州兴业新材料股份有限公司

Stock Code:SH603928   | Chinese | English
Casting Resin Series Functional Coatings Series Melting Materials Series Riser Sleeves Series Acrylic Resin Series Auxiliary Materials Series
Home | Product Center | Product | Functional Coatings Series

Coating for Lost Foam

Good air permeability of the coating layer, high refractoriness.

Characteristics
Good brushability and adhesion for lost foam. 
Good air permeability of the coating layer, high refractoriness. 
Smooth casting surface, no carbureting defect. 



Specifications / Models





How to use

Dilution: mix the coating in the tank uniformly, then add water (or alcohol, ≥99.7%). Mix them uniformly again, test its Baume when it becomes static, and repeat this process until it meets the requirement. 

Brush coating technical parameters: Baume of water-based coating: 50-65; density: 1.30-1.50g/ml. Baume of alcohol-based coating: 70-80; density: 1.3-1.50g/ml. 
Brush coat: clean the mold (core), brush the prepared coating onto the surface of the sand mold, avoid the stacking of coating. If need multiple times, dry it before brushing next time
Attention: when flow the alcohol based coating, there should be no open fire within 5 meters, the motor of the coating machine should be explosion-proof. Impurities should be kept away from the coating, and clean up the coating tank on the same day. 



Packing and Storage

Packed in plastic drums with sealing cover, 40kg net weight each.
For alcohol based coating, keep good ventilation, and keep away from open fire and collision. 
Stored in room with temperature of 10-30℃, well ventilation, keep away from water, fire, heat source and direct sunshine. 
Shelf life is 6 months with the above conditions.


Copyright © 2016 Suzhou Sinye Materials Technology Co., Ltd. All Rights Reserved.